Boxster Wind Deflector Buying Guide: Mesh, Glass or Acrylic?
A wind deflector – also called a wind stop, wind blocker or windscreen – is the single best upgrade for top-down driving in a Porsche Boxster. This guide explains what it does, the three main types, and what to look for so you buy the right one first time.
What does a wind deflector do?
With the roof down, air flows over the windscreen, curls round behind the seats and blows back into the cabin. That’s the buffeting you feel on the back of your neck and hear as noise at speed. A wind deflector sits between the roll-over hoops and blocks that returning air, so the cabin stays calmer, quieter and warmer.
The three main types
1. Factory mesh
The deflector Porsche supplies is a fine mesh stretched in a frame. It does a reasonable job, but by design it lets some air through, and the mesh makes the view out of the back less clear.
2. Glass
Glass deflectors are clear and resistant to scratches. They are heavier than the alternatives and, like any glass, can break if they take a knock.
3. Acrylic (Perspex)
A solid acrylic panel blocks the air completely, is light, and gives a clear view through the rear-view mirror. It can be tinted or engraved with a crest or your own design. The surface is softer than glass, so it needs a little care when cleaning (see below).
What to look for
- Thickness and rigidity. A thin panel can flex and flutter at motorway speeds. 6–10mm acrylic stays rock-solid.
- A proper fit. The deflector should slot into the factory fitting without tools and sit snugly, with nothing to rattle. A cushioned edge helps.
- One piece, or parts glued on? Some screens are a flat sheet with plastic parts stuck on to make them fit. A panel machined from one piece has no joins to crack or come loose.
- The edge finish. The top edge is the part you look at. A polished edge looks like glass; a rough-cut edge looks cheap.
- Height. A taller screen gives more shelter, especially for taller drivers.
- Clear or tinted. Clear gives the best view behind; tinted looks sleek and discreet.
- Your model. Deflectors are model-specific. Ours fit the 718, 981 and 982 Boxster, which use the factory wind deflector slot behind the seats – here’s how to check your car has one.
Looking after an acrylic deflector
- Clean with warm soapy water and a soft microfibre cloth.
- Avoid household glass cleaners containing ammonia or alcohol, and anything abrasive – they can cloud or craze acrylic.
- Rinse off grit before wiping, so you don’t drag it across the surface.
Our wind deflectors
We make ours from solid cast acrylic, machined from a single piece, with a polished seen edge and a neoprene-cushioned fitting edge. They come in clear or tinted, 6–10mm thick, in standard or 32mm-taller High-Top heights, plain or engraved. Every screen has our fit guarantee and a 3-year warranty.
Which of ours is right for you?
- Ultimate – 10mm clear, the most rigid, with a big polished edge. Our most popular.
- Sunday – 8mm tinted, for a darker, more discreet look.
- High-Top – 8mm clear or tinted, 32mm taller for extra shelter.
- Everyday – 6mm clear, for a clean, factory-style look.
Each comes plain, with one of our standard designs, or engraved with your own. Compare the collections side by side. UK delivery is free and tracked.