Description
Please accept my apologies for the photos. The bridge in the photos was only pushed together without any glue to get some photos. The photos with the bulldog clips show the trims in position. This bridge is delivered as a kit and is ready for paint. These single track bridges are made using a CNC laser and are manufactured from 2mm HDF and 3mm MDF. Each vertical frame is made of 3mm thick MDF with 2mm HDF trims, the horizontal members are keyed into the verticals. The 3mm thick deck is keyed & glued into the Girder frames. The 3mm thick wind bracing frame is keyed & glued onto the top of the Girder frames. The box-beam design results in a surprisingly strong structure. The total extents of this bridge are: 800mm long, 88mm wide and 110 high, the recommended maximum span is 780mm. The interior width of the bridge is 75mm and offers a vertical clearance of 98mm between the surface of the deck and the underside of the wind bracing frames. This bridge could be used upside down to give better views and access to the tracks & rolling stock. We design and make everything that we sell which means that we are free to make off-book variations that may better service your use case. If you want a variation or would like to get in touch then please email us or use our contact form. Wherever possible, our packaging is made from recycled materials and are letter-box friendly to enable easy unattended delivery.800mm Single Track Girder Bridge
for OO gauge model railway projects.
I suggest the use of PVA wood glue along with a few grains of table salt to prevent slippage but CA glue is a quick and perfectly adequate alternative.
Everything that we produce is made at our workshop in Yorkshire. We pride ourselves on our manufacturing standards, our turn-around times and our reputation for customer satisfaction. Please take a look at our feedback, it says it all.Additional information
Weight 600 kg Dimensions 500 × 200 × 40 mm